1299 2.5k To Spend On A Base 1299????

Advikaz · Mar 30, 2017

Martin T said: ↑

Its quite simple..
I removed the silencer from the bike Then did a little googleing to find the location of the cat chamber, i then slit it open with a slitting disk on the grinder.. The cat is right in front of you, the hard bit is getting it out! I drilled the center out and collapsed it in on itself. Once its out and all cleaned, I Tig welded it all back together, purge welding it to stop any porosity. I repainted it in VHT satin black, acid cleaned the Ali parts and re fitted it all.

As for the exhaust Valve.... The Servo is located near the cooling fan at the bottom of the motor, i just unclipped the control cable from the valve, its springs open as its default setting. then unpluged it and just put it in the box with the rest of the redundant parts.

Its all quite simple.... If you not able to do the De-Cat i dont mind doing it for you, i'd just charge the time it takes.

Hope that helps

PS i'll be sticking it on the Dyno soon to smooth out the fuel curve, I'll let you know how that goes.
Click to expand...

Much louder ?

Martin T · Mar 30, 2017

no not really, but ive not had a sound meter on it

1299 2.5k To Spend On A Base 1299????

Advikaz Elite Member

Martin T New Member

Useful Searches

1299 2.5k To Spend On A Base 1299????

Advikaz Elite Member

Martin T New Member