Nope, it's on the other side of the swing arm. That being said, having the rear wheel off will make re-tensioning the chain a bit easier, especially re-torquing the eccentric pinch bolts because of the easier access. One of the first thing's I did on my '13 bike was to set the chain perfect, then get it on the abba stand and re measure it and write that down in the lid of my toolbox.
Bradders! I have a little used black Supersprox 42t sprocket that has done less than 1000 miles, the anodise is still on it for £60 posted if your interested!
To be honnest, fuel consumption is more! And also the tire weer is more! But that's NOT due to the sprocket, but due to the extra fun it brings to my right hand No, serious, when riding normal, there is totally no difference in fuel consumption. 6th gear is much better now for cruising. And overal revs is only 5% more, so not notisable
I used to race rotax powered karts Steve. I wish I still could but age and wisdom have got the better of me!
Great stuff !! I did a bit myself, I raced a jade ktm 250, Mainly Dunkeswell & Shennington,good times !
Right, I have undone the big but and find that the Cush drives need holding to undo the nuts?! Looks like wheel off and special too shit!! Any tips fellas before I lose it..... @rotaxracer @Stonesie
Looks like a 12mm size with a star at the end, but acres with all the disc and speed sensors seems too restricted.
