1200 Error Code - P4031 / C0031 Speed Sensor

Good work. that point of the small loom going into the Larger loom is where i stoped thinking thats well supported and no need to continue.most impressed by your efforts,

 

HI guys,

I'm reading now the post, but I had the same issue few weeks back, fixed by a garage in London as I don't have enough tools at home. to me was the wire broken in the front as well, plus my fuel sensor was off as well.

Nice job Stavrich

 

Hi MTS users,
I had the same problem on my MTS 1200s 2014 (Speed sensor error, ABS off, DTC off) it happened generally when speed was higher then 160 km/h. I started from:

1. Front abs sensor

2. Rear abs sensor

3. Front accelerator located on left fork

4. Front accelerator located on body

5. Rear accelerator

still no results – frustration grows

6. voltage from module 2.45V it is OK

7. impedance of sensor also ok

8. cables in all critical places – ok

I am starting to feel desperate

9. I tried to contact local ducati service. They suggest to change tires.

10. Front tire - no result

11. Rear tire - no result

12. Front and rear distance between time wheel and sensor.

Frustration level expert

Be patient finally I have solved problem.

13. Last changes solving problem: front fork oil + front fork seals + front wheel bearings

It solved the problem but don’t ask why.



This bike is really nice but can knock you down.

I had also another case, after 1 hour on highway with continuous speed over 200 km/h my engine stopped. After short investigation inside my engine I found the shaft broken near the magnetic wheel.

New shaft cost 4000USD.

Fortunatly I was able to buy a used engine only with 7000 km. Cost 2000USD.

After engine exchange everything is ok but I can say MTS it’s like very nice blond girl.

Love and hate – probably You now it.

 

That cable is a common problem, mine went a few years ago. It is too tight and constantly under tension.