998 Prices Of 998s's

Discussion in '748 / 916 / 996 / 998' started by Dr.D, Dec 12, 2018.

Page 2 of 15
  1. One owner bike...that should be much more reassuring than a fully stamped service book and 4 owners.
    I would anytime pay a little premium just to have a one owner bike, especially if possible to chat and see what kind
    of rider/person he is.
    So yes, imho is realistically priced.
     
    #21 alexko, Dec 13, 2018
    • Agree Agree x 2
  2. Bullshite..
     
    #22 deleteduser211220, Dec 13, 2018
    • Agree Agree x 2
  3. An FE S Mono is the one to have if not going for an R
     
    #23 Exige, Dec 13, 2018
  4. S Kit was Dealer fit - mine was fitted with Magnesium Wheels, S Engine Kit, Ohlin's Rear Shock and Steering Damper, Carbon Bodywork and Full 50mm Termi System from new and I have all the standard bits bubble wrapped :)
     
    #24 Exige, Dec 13, 2018
    • Like Like x 1
  5. 998r if you can find one
     
    #25 cookster, Dec 13, 2018
    • Agree Agree x 2
  6. :)
     
    #26 deleteduser211220, Dec 13, 2018
    • Like Like x 1
    • Face Palm Face Palm x 1
  7. Today prices 20k then mono 998fe
    Low miles
     
    #27 Roadtrip, Dec 13, 2018
  8. Just to set the record straight chaps. There were only 27 officially imported 998s Mono's ever imported, 20 red and 7 yellow. Many Biposto's were made into mono's by changing the seats etc.
    As to engine internals, yes these motors were based on the 996R lumps so most of the internals were the same. They had Ti valves and Ti con rods but the rods were a slightly lower spec than the R models. If you get the chance to see inside a 998s motor it really is a thing of beauty.
     
    #28 RCGBOB44, Dec 13, 2018
    • Like Like x 1
  9. Are you not counting the FE Mono's in your numbers? :thinkingface:
     
    #29 Exige, Dec 13, 2018
  10. #30 Exige, Dec 13, 2018
  11. No, the only difference with FE is that they have the gayboy flash seat and poncy forks. :joy::laughing::grinning:
     
    #31 RCGBOB44, Dec 13, 2018
    • Funny Funny x 2
  12. And a number plaque?
     
    #32 Kevin Tallant, Dec 13, 2018
    • Agree Agree x 1
  13. So what do we reckon an FE Mono circa 11000 miles is worth? Whatever someone is willing to pay is the usual answer of course.
     
    #33 Archermav, Dec 13, 2018
  14. Post No 1 shows a fair price perhaps :thinkingface:
     
    #34 Exige, Dec 13, 2018
  15. Maybe, but that's for a 998s. But always useful to have a ball park figure. Something to ponder on.
     
    #35 Archermav, Dec 13, 2018
  16. Don't be silly...you need all three models just for the hell of it:):upyeah:
     
    #36 XH558, Dec 13, 2018
    • Funny Funny x 1
    • Agree Agree x 1
  17. Probably £12K? :thinkingface:
     
    #37 Exige, Dec 13, 2018
    • Like Like x 1
    • Agree Agree x 1
  18. ffs that old chestnut again..
     
    #38 andyb, Dec 13, 2018
  19. One of these was sold at my local earlier in the year for £15k:upyeah:
     
    #39 XH558, Dec 13, 2018
  20. The 998 is a shrewd buisness move, it means 999 is not needed as already have that engine. But for the 'Holy Trinity' I NEED early 4 valve as well
     
    #40 Kevin Tallant, Dec 13, 2018
    • Like Like x 1
(You must log in or sign up to post here.)
Page 2 of 15
Do Not Sell My Personal Information